Kalea Bay LED Outdoor Fireplace
REV. B Page 26
FINAL PREPARATION
Fig. 36
Covering the entire fireplace floor is NOT permitted
in the shaded area.
Note:
Media amounts listed in Table 8 are guides and can
vary depending on media used. Ensure not to cover more
than ½ -inch above the actual burner tube and keep all
media within the burner pan area (See Fig. 35).
Fig. 35
End view of burner with media.
INSTALLING HOOD(S)
Step 25:
The fireplace requires a hood to be installed
into the upper opening of the firebox. All models require
five (5) screws to secure the hood to the fireplace except
the 72-inch model, which uses seven (7) screws (77129 -
8-32x1/2” stainless pan head) to secure the hood. The hood
protrudes 1-inch from fireplace opening. Fig. 37 shows hole
location and installation process for hood installation. The
protruding area of the hood is to be angled downward for
proper installation, see Hood Detail below.
Fig. 37
Installing hood(s) on the fireplace.
Hood Screw Locations
FRONT VIEW
SIDE VIEW
Hood
(Deflector Facing Downward)
Hood Detail
End View
Burner Pan End View Showing Media Placement
Proper Media Height
Burner Tube
No media in the shaded area of the fire box
WARNING
: Media must be installed in the fireplace as
previously described and used during operation.
