Kalea Bay Outdoor Fireplace
REV. 4-17-19 Page 3
SAFETY
CERTIFICATION:
These outdoor fireplaces are tested and
approved to ANSI Z21.97-2014, CSA 2.41-2014
standards by Underwriters Laboratories using listing
MH#60069. It should be installed by a qualified installer in
accordance with local and state building codes using
National Fuel Gas Code ANSI Z223.1/NFPA54 or current
CSA-B149.1 installation codes for Gas Burning Appliances
and Equipment in Canada.
DESCRIPTION:
These Outdoor fireplace models come
ready to operate with HI/LO capabilities once installation is
complete.
These are radiant fireplaces only and do not have a fan
option.
Do not burn real wood or other combustible
materials in these fireplaces.
Use only approved media.
All models are shipped as Natural Gas but can be
converted to Propane Gas by ordering an optional
conversion kit. See page 29.
There is no top or rear venting required for this fireplace,
however, it is mandatory to provide adequate clearances
according to this manual and cross ventilation in the
enclosure.
The burner assembly is removable for service. NEVER
obstruct the front opening(s) of the fireplace.
LOCAL CODES
Install and use fireplace with care. Follow all local codes.
In the absence of local codes, use the latest edition of the
National Fuel Gas Code ANSI Z223.1/ NFPA54.
Available from:
American National Standards Institute, Inc.
25 West 43rd Street, 4th floor
New York, NY 10036
National Fire Protection Association, Inc.
1 Batterymarch Park
Quincy, MA 02169-7471
All media (i.e. lava rock, lava stones, lava boulders and
fire glass) have the potential of thermal spalling. This is a
process that may occur when media is wet and moisture
gets trapped inside of the material due to rapid temperature
differences. When this happens the media has the
potential to crack or “pop” outside the fireplace. Heavy
rains, high humidity and the presence of moisture can
contribute to this process.
1. This appliance is configured from the factory only as
Natural gas. It appliance can be converted to LP gas.
2. Do not place Propane (LP) supply tanks inside any
unapproved structures. Locate propane tanks outdoors
if unsure.
3. This fireplace is to be used only outdoors in a well
ventilated space and shall not be used in a building,
garage, or any other enclosed area.
4. Do not use this fireplace as a wood burning fireplace.
Use only high temperature media approved for use with
this fireplace.
5. Do not use this fireplace to cook or burn paper or other
objects.
6. Do not use if exposed to or under water. Immediately
call a qualified service technician to inspect the
fireplace and replace any part of the control system
and any gas control which has been under water.
7. Turn fireplace OFF and let cool before servicing. Only
a qualified service person should perform service.
ALWAYS USE CAUTION WHEN USING THE FIREPLACE
Extra caution should be taken when lighting a fireplace
when heavy rains, high humidity and moisture are present.
Light the fireplace and leave the area while the heat
dissipates any moisture out of the media. We strongly
recommend that during this drying out time that you monitor
the fireplace from a distance. This drying out period should
be no less than 30 minutes. Continue monitoring the flame
from a safe distance to ensure that all popping has ceased
before fully enjoying the fire.
CAUTION:
CALIFORNIA PROPOSITION 65
WARNING
This product is designed to operate with one of the following fuel sources: Liquid Propane or Natural Gas.
The fuel used to operate this product, and the products of combustion of such fuel, can expose you to
chemicals including Benzene which is known to the State of California to cause cancer, birth defects and
other reproductive harm and Carbon Monoxide which is known to the State of California to cause birth
defects or other reproductive harm.
(For more information go to: www.p65Warnings.ca.gov.)
