Kalea Bay Outdoor Fireplace
REV. 4-17-19 Page 24
FINAL PREPARATION
Fig. 29
Installing windshield into clips (glass holders).
GLASS HOLDER INSTALLATION
The glass windshield(s) slide into the two clips on each
end of the fireplace and rest in position if installing for the
fireplace (See Fig. 29) for the location. Use two screws
(#77129) for each glass holder. Insert screws into the
installed in the fireplace side wall to secure the glass
holders. There is one glass windshield provided with this
fireplace. The glass will rest on the bottom tab of each
windshield clip.
CAUTION:
THIS IS TEMPERED GLASS. DO NOT CHIP
GLASS. CHIPPED TEMPERED GLASS CAN BREAK
WITHOUT WARNING.
Fireplace Inner
Side Panel
These
rivet-nuts
not used.
7”
Fig. 28
Windshield glass holder location.
CAUTION
HOT SURFACE
DO NOT TOUCH
WARNING:
During operation of the fireplace the
glass will get hot! Hot glass can cause burns.
DO NOT TOUCH
glass until cooled.
NEVER
allow children to touch the glass.
GLASS WINDSHIELD
Glass Holders
