REV 8/21/06 Page 15 of 16
QUICK SET-UP GUIDE
FOR FIREGEAR FGP-305 PROGRAMMABLE TRANSMITTER
This guide is a “short cut” method to SETUP and OPERATE the programmable transmitter. For
detailed instructions for each feature and function, see OWNER”S MANUAL.
INITIAL SET-UPSET FUNCTIONS USING BUTTONS ON FRONT OFTRANSMITTER
1. Remove battery cover.
2. Insert 2AAA batteries.
3. Press SETTING button.
4. Replace battery cover.
All further programming
to be made on front of
transmitter.
OPERATION
– Press MODE button on TRANSMITTER to change operating functions.
1 ON indicates the system is on, either manually or
thermostatically.
2 OFF indicates the entire system is turned off.
3 THERMO indicates the system will automatically
cycle ON/OFF, depending on programmed SET
temperature.
4 PROGRAM indicates the system is operating with
PROGRAMME settings.
OTHER OPERATIONS
– Press corresponding buttons on TRANSMITTER to activate functions.
TIME OF DAY – Press TIMER/TIME button for less than ONE second.
TIME OPERATION – Press and hold TIMER/TIME button for two seconds.
COUNTDOWN TIME -- pressing UP or DOWN buttons.
NOTE: Press SET button to stop LCD Digits from flashing.
1. SCALE
(DEGREE
F/
DEGREE
C) –
Press UP or DOWN button. Press
SET button.
2. DAY
OF
WEEK – Press AHEAD or
BACK button. Press SET button.
3. HOUR
OF
DAY – Press UP or
DOWN button. Press SET button.
NOTE: AM or PM on LCD.
4. MIN.
OF
DAY – Press UP or DOWN
button. Press SET button.
NOTE: Each SETTING will flash,
separately, on LCD screen. After each
SETTING you
must push SET button.
You may not have to change factory
setting, but you must push SET
button.
Setting Button
TIME
AM
WE
OVERRIDE HOLD
4
3
2
FLAME
SU
NITE
PROGRAM
ON
THERMO
OFF
1 2
3
4
SET
AHEAD
BACK
PROG
1
SET
AHEAD
BACK
PROG
Button Settings
Summary of Contents for FGP-305
Page 14: ...REV 8 21 06 Page 14 of 16 ...
