5
INSTALLATION continued
FIGURE 4 – ADVANTAGE BURNER PAN WITH NATURAL GAS CONTROL VALVE – FRONT VIEW
FIGURE 5 – ADVANTAGE BURNER PAN WITH NATURAL GAS CONTROL VALVE – REAR VIEW
WHEN INSTALLING THE APPLIANCE, DO NOT OBSTRUCT THE FLOW OF COMBUSTION AND VENTILATION AIR.
FOR LIQUID PROPANE INSTALLATIONS, YOU MUST USE A LIQUID PROPANE CHANGE KIT.
FOLLOW THE INSTRUCTIONS THAT COME WITH THE KIT.
SET UP AND ASSEMBLY
Your FIREGEAR ADVANTAGE BURNER DECORATIVE GAS LOG
HEARTH KIT comes, ready for gas assembly connections, particular
for use, in your area.
!!! IMPORTANT !!!
BEFORE YOU BEGIN – Audit the gas pressure, at the fireplace stub,
to insure proper, minimum gas pressure; see the specifications,
beginning on page 3 of this manual.
!!! IMPORTANT !!!
BEFORE YOU BEGIN – Insure that the fire box meets the minimum
specifications of the appliance; see the specifications beginning on
page 3 of this manual.
!!! IMPORTANT !!!
This appliance, when first installed, may produce unpleasant odors;
these will gradually diminish.
!!! IMPORTANT !!!
Decorative Gas Log Sets are shipped with the appropriate gas
connections for each type of gas, i.e., Natural Gas or Liquid Propane.
If you have purchased an inappropriate unit for your application,
contact your retailer, installer, or the firegear Customer Service Center.
1- Remove all contents from the Hearth Kit shipping container.
( Box One )
2- Check the contents of the shipping container against the shipping
and packing list, or the parts list in this manual. Report any
missing or damaged parts to your retailer.
3- Remove any and all protective wrapping from the appliance.
