Before each use check:
• that the thermostat is switched on
• that there is no damage to the wiring
• that the heater is plugged in
Warning:
It can be dangerous to install heater near curtains and other combustible materials.
Never wrap the power cord around the heater as this can damage it.
If the power cables have any damage do not use them.
Any damage must be fixed by trained professionals.
If you wish to fit more than one heater do this entirely separately.
3. Installation
3.1 Installation Instructions
Installation on the wall: Attention! The appliance must be installed on the solid surfaces like
concrete and metal.
Never install on flammable surfaces!
See pages 4-7 to come up with the most appropriate installation method for your heater.
Drill four 8mm diameter holes on the wall to the place where the unit will be placed with the
distance shown in (Figure-1).
Insert the 8mm diameter wall plugs, supplied with the unit, into the holes.
Mount two of the L shaped legs on the wall using the 4
×
35screws supplied with the unit.
Mount the other L legs on the unit using the M5 screws and the small wrench as shown in
(Figure-2). (corresponding nuts are already built in on the body of the unit)
