Notice:
1- Replace the old batteries with the same type batteries. Otherwise, your heater may
not function well.
2- Pull out the batteries in case of long terms of disuse to prevent leakage which may
impair your remote control.
7.2 Operation of the Remote Control
1. Turn on the power, the buzzer on the products will beep once, the digital screen and the
indicator is no show. At this time, press On / Off button to make it in stand by mode.
2. Press the function button to choose the power level. P0 indicator appears on the screen,
and the indicator flashes three times, indicating that the appliance is in stand by mode. P1
indicator appears on the screen, and the indicator flashes three times, indicating that the
appliance is in low-grade mode. Press the function button again to mid-grade, the buzzer
will beep once, P2 indicator appears on the screen, and the indicator flashes three times,
indicating that the appliance is in mid-grade mode. Press the function button again to
high-grade, the beeper will beep once, P3 indicator appears on the screen, and the
indicator flashes three times, indicating that the appliance is in high-grade mode. Press
the function button again, you can choose low, medium and high gear, P0 indicator
appears on the screen, and the indicator flashes three times, indicating that the appliance
is in stand by mode. Continuously press the function button, “P0 - P1 - P2 - P3 - P0”
appears on the digital tube as a circulation , corresponding to the appliance mode is
“Stand-by ---Low-grade---Mid-grade---High-grade---Stand-by”.
3. In stand by mode, press the timer button, the appliance can set time from 1 to 24 hours.
After set the time, the indicator next to the digital tube will light up, it means that the
appliance has been selected timer function. "0" indicates time not set.
4. When the appliance is on working, the digital screen always shows the power state
(P1-P2-P3). The timer setting, when the indicator lights up, it means that the machine has
been set a timer function from 1 to 24 hours. To view the regular time, press the timer
button, the appearing time is the present setting time, at this time the indicator also flashes
three times continuously, indicating that the appliance enters into the timer setting state.
