Mount and fix the L shape legs on the wall and on the unit respectively, using the M8
×
13
bolts and nuts and the washers as shown in (Figure-3) and tighten by using the wrench
supplied.
Figure-4
Depending on the area to be heated the angle of the unit can be adjusted between 0-45
degrees by the help of M8 Bakelite head bolt and nut fixture.
Before operating the unit joints should be checked once again.
4. Using steps
Step 1
：
Connect the power line and the power strip
Step 2
：
Press Open/Close once
，
the digital screen shows P.0
