10
placed securely and cannot fall out – ideally within the
pillowcase or cushion cover.
Position the Strobe:
• Close to a power socket where it can be easily
plugged in and the cable does not create a
tripping hazard.
• Where you can see the Strobe flashing from
anywhere in the room
• Where you can see the LEDs on the front of the unit
• Ensure that the Vibrating Pad cable can easily reach
its position under the chosen pillow/cushion
NOTE:
The Strobe can be fitted to a wall OR it can be
placed on a table.
CAUTION:
Do not put the Strobe and Vibrating Pad:
• Outside the building
• In a damp or humid area
• In an area where the temperature could regularly
drop below –5°C or rise above 40°C
• Anywhere where the units can easily be knocked
or damaged
It is important that if you install additional Strobes and
Vibrating Pads you test each of these upon installation
to check they are “learned in” to the rest of the network.
Wireless Range: The wireless range of Wi-Safe 2
products is over 200 metres in clear air/clear line of
sight.
However it is recommended not to exceed 35m as the
maximum distance between any interlinked Wi-Safe
2 smoke alarm or carbon monoxide alarm from the
Strobe and Vibrating Pad. This is because the range
can be reduced by walls, and other obstructions in the
building.
Position the Vibrating Pad:
• Under your pillow
• Under a cushion on a chair where you are likely
to fall asleep
Test and check that the Vibrating Pad can be felt in all
circumstances where you may fall asleep. Ensure it is
