background image

9

ALARM TEST

The alarm should be attached to the base 
plate and tested in its installed position 

Press the test button in the centre and 

release 

The unit’s Escape Light will illuminate 
and it will sound an audible alarm 
consisting of 2 cycles of 3 loud beeps, 
then stop automatically 

The red LED on your alarm will flash 

rapidly during the audible signal 

NOTE: 

The test button accurately tests 

the alarm’s smoke sensing circuit, there is 
no need to test your alarm with smoke  If 
your smoke alarm fails to give an audible 
test signal, please refer immediately 
to ‘Troubleshooting’ at the end of this 
manual 

ALARM SMART 

SILENCE™

DANGER:

 If your smoke alarm emits the 

full alarm signal and you are not testing 
the unit, the smoke alarm is warning 
you of a potentially dangerous situation 
that requires your immediate attention  
Only use the alarm silence function after 
making sure that there is no ongoing fire 
emergency situation  Do not block the 
vents on the alarm or disable the smoke 
alarm in any way, as this will remove your 
protection  Smoke alarms can sometimes 
react to cooking fumes or other non 
emergency situations  Your smoke alarm 
features “Smart Silence” technology  In 

Summary of Contents for THERMOPTEK ST-623E

















Reviews: