12
TROUBLESHOOTING
Problem
Solution
Your smoke alarm does not
sound during testing
• If testing immediately after first activating the alarm
or replacing the batteries, you should allow a few
seconds for the alarm to settle before testing
• Make sure you push the centre of the test button
firmly
• If the unit has been silenced and is in low sensitivity
mode it may not test Wait 15 minutes then try again
• If the alarm has been recently fitted and still fails to
self test then contact Technical Support
Your smoke alarm chirps
intermittently
• Check the location of your smoke alarm (see
‘Positioning’)
• Check that your smoke alarm is definitely the source
of chirping; make sure the noise isn’t coming from
another alarm by process of elimination
Your smoke alarm activates
when no smoke is visible
• Check the location of your smoke alarm (see
‘Positioning’)
• Clean the smoke alarm (see ‘Maintenance’)
Summary of Contents for THERMOPTEK ST-623E
Page 1: ...User Manual Smoke Alarm with Escape Light Model ST 623E ...
Page 15: ...15 ...
Page 16: ......
