8
Hold the alarm up to the base plate and
push and rotate the alarm clockwise into
position as shown Make sure that the unit
is securely fitted
After fitting your alarm to the base plate,
wait for 5 seconds for the alarm to settle
then test the alarm
BATTERY
REPLACEMENT
IMPORTANT:
Only the following batteries
can be used for replacement Use of a
battery other than those recommended
below may have a detrimental effect on
the alarm’s operation
AA Alkaline type:
Energizer E91
Duracell MN1500
Panasonic ProPower LR6
Remove the alarm from its base plate by
turning anti-clockwise and pulling gently
Remove the existing batteries and replace
with new batteries from the recommended
list making sure that the positive and
negative connections are in the correct
position
Summary of Contents for THERMOPTEK ST-623E
Page 1: ...User Manual Smoke Alarm with Escape Light Model ST 623E ...
Page 15: ...15 ...
Page 16: ......
