8
Wall Mounted Installation
Due to the many different materials used on different walls, it is hig hly recommended that you consult
your local builder before you install this appliance on the wall.
A. Select a location that is not prone to moisture and is located at least 36" (914mm) away from
combustible materials such as curtain drapes, furniture, bedding, paper, etc.
B. Have two people hold the appliance against the wall to determine the final location.
C. Place unit face down on a soft, non abrasive surface. Remove the wall bracket from the back of the
unit by removing the screws, refer to Figures below 1 and 2.
D. Mark out location, then mount the bracket onto the wall using the supplied wood screws. This
bracket MUST have the hooks facing upward and be leveled. NOTE: It is strongly recommended that the
mounting bracket be screwed into the wall studs where possible. If the wall studs cannot be used, ensure
that the supplied plastic anchors are used to affix the bracket to the wall and the bracket is adequately
secured.
E. With the wall mounting bracket installed have two people lift the appliance up and insert the two
hooks on the bracket into the two slots on the back of the appliance.
F. Check the appliance for stability ensuring that the bracket will not pull free from the wall.
FB-SPH40-60 Wall Bracket Illustrated
BRACKET
1.
2.
