23
measured in UNI EN ISO 3741 reverberating
chamber in compliance with the EN 60704-1
regulations, is compliant with the EN 60704-1
: 1998 and EN 607043 : 1996 regulations. The
equivalent level of noise exposure of a worker,
exclusively related to limit of 240 min . per eight
hours of use of the appliance, is equal to 78
dB(A), in compliance with ED 86/188/EEC and
ED 200311 0/EEC . Therefore, when operating
the appliance, no provisions need to be taken
in order to prevent such risks arising from
noise exposure in the workplace (articles 3-8
of ED 2003/10/EEC) .
MAINTENANCE
It is essential to periodically check the state
of the supply cable and plug . In the event
the supply cable or plug are damaged, call in
skilled technical personnel to replace them,
in order to prevent any risk . In CE-certified
appliances a special tool is required to open
the base plate to access the cable . We rec-
ommend using original spare parts only . In
order to assure the lasting efficiency of the
appliance, skilled technical personnel must
be called in to perform periodical mainte-
nance, including detailed checks of the state
of those components subject to wear . The
state of the grinding blades must be checked
periodically . Keeping the grinding blades in
an excellent state assures high-quality grind-
ing, resulting in greater productivity and lim-
ited overheating .
CLEANING ThE APPLIANCE
Disconnect the power supply from the
grinder-doser by unplugging it before clean-
ing . The appliance must not be cleaned using
water jets . Do not install the grinder-doser in
rooms where water jets are used for clean-
ing . The grinder-doser must be cleaned
periodically by skilled technical personnel
only . Use perfectly clean, disinfected cloths
or brushes for cleaning . Do not use abrasive
products as these are liable to take the sheen
off shiny parts .
hopper
Wash the hopper once it has been removed
from the appliance (unscrewing the relevant
fastening screw), using neutral soap and wa-
ter, rinse abundantly with lukewarm water
and dry thoroughly . It is advisable to clean
the hopper periodically . Once the hopper
has been cleaned, it must be attached to the
upper grinding blade holder using the rel-
evant screw .
Grinding system
Remove the safety screw which prevents the
adjustment disk from being removed . Unscrew
the adjustment disk by turning it clockwise .
Having removed the upper grinding blade
holder, clean the grinding blades, the threads
and the entire grinding system thoroughly us-
ing a clean brush and cloth . Having refitted the
upper grinding blade holder in the relevant
slot, screw the adjustment disk back on, and
after refitting and securing the hopper adjust
the grinding as required .
DIRECTIVE
2002/96EC
(RAEE):
INFORMATION
FOR USERS
This information is addressed only to the own-
ers of appliances bearing the symbol (Fig . A)
on the adhesive label with the technical data
applied to the product (serial number label):
This symbol means that, according to the cur-
rent regulations, this is an electrical or elec-
tronic unit and complies with EU Directive
2002/96/EC (RAEE) . Therefore, at the end of
its life, it must be disposed of separately from
domestic waste, by delivering it free of charge
to a recycling centre for electrical and electron-
ic appliances, or by returning it to the retailer
when you purchase a similar unit . The user is
responsible for delivering the unit, at the end
of its life, to the appropriate recycling centre
otherwise he/she will incur the penalties pro-
Fig . A
