Fiorenzato | Cod. AllGround_001 Ed. 01/2021
50 / 116
EN
2.3
Identification of the main parts of the grinder
The
grinder consists of a machine body and a supply hopper on the top
to load the roasted coffee beans before grinding them. With reference to Fig. 2, the
grinder consists of the following parts:
1 Hopper lid
ON
OFF
3
10
9
8
1
5
4
2
6
7
Fig. 2
- Identification of parts
2 Coffee beans hopper
3 Shutter on hopper
4 Ring nut for grinding size
adjustment
5 Locking/unlocking ring nut
pin
6
Removable chamber with
upper grinder
7 Machine/user interface
display
8 Removable ground coffee
dispensing tube
9
Adjustable filter holder cup
support fork
10
Machine on/off switch
2.4 Intended uses
This appliance has been designed exclusively for the grinding of roasted coffee beans.
Any other use is to be considered improper and therefore dangerous. The manufacturer
declines all responsibility for any damage due to improper or incorrect use. Do not use
the appliance to grind other types of food or other granular materials.