19
VACUUM MOTOR MAINTENANCE
The vacuum motors must be checked and cleaned .The brushes should be checked all six months
and replaced, if necessary.
1.
After removing the key from the control dashboard ,remove the vacuum motor by loosening the
knobs and by removing the connection plug (fig. 14)
2.
Release the sponge filter under the motors that can be extracted ,cleaned and replaced.
3.
Check the suction fan from the hole located in the front part of the vacuum motor.
4.
To check the brushes, first of all remove the plastic cap, then unscrew the screws and remove
the two plastic brushes supports.
5.
Once checked and replaced(if necessary)the brushes can be easily remounted ,by reassembling
all elements until the initial situation has been reached.
Fig. 14
CAUTION
Each maintenance and repair operation not described under the “ordinary
maintenance” should be performed by qualified personnel authorized by
FIORENTINI SRL only.
1.
motor knob
2.
connector plug
3.
carbon brush
