16
can compromise the stability of the machine. Never pass through slopes in trasversal direction;
when going through a downhill road, always adjust the speed to the environment conditions. Do not
turn the machine at excessive speeds, particularly if the floor is not flat.
CAUTION: DANGER
Never operate the machine when stopped for special operations (setting up, maintenance, etc.).
Before starting the work, check for any possible visible defects on the safety devices, and the
correct operation of the emergency stop pushbutton or of the equivalent mechanism . Never operate
the machine when the control panel indicates defective tools, warning lights, etc.
MAKE SURE THAT:
- No strangers are present near the machine
- No strange objects (appliances, cloths, etc.) are on the machine
- The machine does not emit strange noises after its starting; if so, stop it immediately and detect the
cause.
All doors and protections are regularly closed.
Never let approach strangers near the machine. Use, maintenance and repair of the machine are
allowed only to operators authorized by the person responsible of the machine, who knows the
manual contents. These operators should be persons physically and intellectually fit for this work,
not under alcohol or drug effects.
MAINTENANCE INSTRUCTIONS
During the scrubbing operation, the maintenance of the machine and the replacement of parts, it is
necessary to extract the ignition key.
Instructions for battery:
- when charging the battery, let the battery cover open
- do not use free flames and do not smoke near batteries
- caution: liquid is corrosive
- do not cause sparks near the batteries
- battery gases are explosive
- do not cause any short-circuits
- do not invert polarities
GENERAL NOTE
For any maintenance, revision or repair, engage qualified personnel or call an authorized workshop.
Use only original fuses with the prescribed current intensity. In case of a power failure, disconnect
the machine or the plant immediately. The electric installation should be periodically inspected and
checked. Any possible failure, such as detached connections and burnt cables should be
immediately removed.
CAUTION
To clean the machine, use aggressive detergent solutions, acids, etc. only when necessary and with
special care. Adhere to all instructions of the detergent manufacturer. Use protective clothes
(overalls, gloves, protective glasses, etc., see CEE standards).
OPERATIONS ON THE ELECTRIC INSTALLATION
The operations on the electric installation can be performed only by QUALIFIED
ELECTRICIANS, instructed in the electric characteristics of the machine and in accident
prevention rules.
CHECKS
The machine must be inspected by a technician, who checks the safety conditions of the machine
and any possible damages or defects visible from outside:
- before setting the machine at work
- after appropriate time intervals
- after any changes or repairs
