REVISIONE N°05/001
ING. O. FIORENTINI S.p.A.
INDUSTRIAL CLEANING MACHINES
4
ASSEMBLY INSTRUCTIONS
CONNECTING OF THE CARPET SWEEPER TO THE BRUSH HEAD
Insert the upper part of the carpet sweeper into the brush head, keeping it in vertical position. The knob “1.1” must be
turned leftwards during this connecting or disconnecting. After the insertion turn the knob in vertical position again.
FLEXIBLE HOSE CONNECTION
After that the carpet sweeper is insert into the brush head connect the connection “2.1” to the upper carpet sweeper cover.
The connection “2.2” must be keep in the low part of the upright, reaching the brush head
joint.
OPERATION/STAND-BY
To start operation, press the block pedal “3.1” and tilt the carpet sweeper backwards, after push on start switch. To stop
operation, switch off keeping it in vertical position.
Attention:
Never drive the operating carpet sweeper above its own electric cable. Lift the carpet sweeper when going into stairs or
high thresholds.
fig. 3
fig. 2
fig. 1
