START-UP AND OPERATION INSTRUCTIONS
ECOMINI
Rev. 000
18/09/2017
28/37
4.7.9 SQUEEGEE BLADES REPLACEMENT
The squeegee blades (figure 4.8) must be replaced when the edges become worn; the blade edges must be
sharp to ensure perfect drying.
To replace the squeegee proceed as follows:
Remove the key from the control panel to prevent unwanted starts (battery-operated version) or
unplug the machine from the mains power outlet (electrically operated version);
Loosen the fixing knobs, remove the squeegee from the machine and place it on a work top (fig.
4.15).
Remove the internal and external bolts, remove the steel strips and the worn-out blades.
Insert new blades and strips, tighten the bolts then adjust the squeegee with the special adjuster (fig.
4.12).
Now reverse the order of the above operations to install the squeegee back on the machine.
FIGURE N. 4.15