START-UP AND OPERATION INSTRUCTIONS
ECOMINI
Rev. 000
18/09/2017
21/37
Below are the symbols on the control panel with a short description of the corresponding function:
Key switch (battery-powered version)
Machine start (electrically
powered version)
Suction on/off
Battery charge state
indicator (battery-powered
version)
Squeegee rotation
Squeegee up/down
4.6.2 CONTROL LEVERS
Brush control lever
(detail 1 fig.4.9):
by actuating this lever, scrubbing brush rotation will be
controlled; both levers operate the same switch, therefore, it is enough to control one to actuate the
function;
Handle angle adjustment lever (detail 2 fig.4.9):
it is used to adjust the machine guiding handle
inclination;
Squeegee lifting lever (detail 3 fig.4.9):
it is used to lift/lower the machine squeegee; if set to its
top position it will control squeegee lifting off the floor; if set to its low position it will control squeegee
lowering to the floor.
1
1
2
3
FIGURE N. 4.9
