START-UP AND OPERATION INSTRUCTIONS
ECOMINI
Rev. 000
18/09/2017
23/37
To adjust the handle angle:
Actuate the lever on the machine handle (detail 2 fig. 4.9);
Move the handle to your required angle then release the lever.
4.7.4 SQUEEGEE ADJUSTMENT
To guarantee efficient drying, it is essential for the squeegee to be perfectly adjusted.
This type of squeegee is very efficient in collecting water to facilitate pipe suction, but very sensitive to
parallelism with the ground.
To ensure correct squeegee adjustment, follow the steps here below:
Remove the key from the control panel to prevent unwanted starts (battery-operated version) or
unplug the machine from the mains power outlet (electrically operated version);
Adjust the squeegee angle via the special control (figure 4.12).
4.7.5 RECOVERY WATER DRAINING
The machine is equipped with a hose to drain water from the recovery tank.
To drain water from the tank, position the machine over a sewer hole, disconnect the hose from the tank to
drain and remove the rubber plug at the end of the hose.
FIGURE N. 4.11
FIGURE N. 4.12
