Finn HydroSeeder T90, Operator Instructions And Parts Manual

Page: 93 / 126

87
WHEN ORDERING PARTS, BE SURE TO STATE
SERIAL NUMBER OF MACHINE
T90 MN1201 Rev. A
GUARD DETAIL
22
BEARING / AGITATOR ASSEMBLY
Ref. No. Part Number Description No. Req’d
1 007420 Bearing and Seal Assembly Kit 2
2

1/2 in. - 13 Hex Nut 4 per
3

1/2 in. Sealing Washer 8 per
4 007211 Flangette with Lube Coupling 1 per
008154 Grease Fitting Adapter 1 per
5 007705 Grease Fitting 1 per
6 003022 Bearing 1 per
7 007212 Flangette 1 per
8 006975 Agitator Bearing Gasket 1 per
9 007416 Agitator Rotary Gasket 1 per
10 007417 Clamping Ring 1 per
11 X0828SS 1/2 in. - 13 UNC x 1-3/4 in. Lg. Agitator Bearing Bolt 4 per
-------- Agitator Shaft Assembly Ref.
12

1/2 in. - 13 UNC x 1-3/4 in. Lg. Agitator Bolt 8
13

1/2 in. - 13 UNC x 1-1/4 in. Lg. Agitator Bolt 4
14

1/2 in. Plain Washer - Type B 4
15 005027-02 Rear Bolt-On-Paddle with Hole 1
16 005027-01 Rear Bolt-On-Paddle 1
17 005081-02 Agitator Drive Stub Shaft 1
18

1/2 in. Lock Nut 12
19 005080 Main Agitator Section with Paddles 1
20 005081-03 Agitator Stub Shaft 1
21 005027-03 Front Bolt-On-Paddle 2
22 005399 Agitator Shaft Guard (If Equipped) 1
NOT SHOWN
022407 Grease Line Elbow 1
012520 Brass Anchor Connector 1
012521 Grease Line Hose 1
KITS AND MARKERS

Standard Hardware Item - Available at your local hardware store.