Finlux FXVT 60, Operating And Installation Instructions

Page: 16 / 48

15
With and , the timer value can be set.
After successful setting of the minute minder time, the timer starts to decrement
the time.
The minute minder will not be stopped by switching off the appliance or
activating the key lock function, it will proceed increasing the minutes until
run out indication.
After reaching the ´00` of the timer, buzzer indicates the run out of time.
To stop the buzzer you have to confirm the `run out` by touching any buton.
Heater timer
Heater timers can be set only for activated heaters (heater level must be set
between 1-9)
First touch of , the minute minder is activated. After touching for the
second time, the timer is assigned to the activated heater. The proposed
assignment is indicated by the related Cooking Zone Indicator, who is flashing.
Touching again after activating the fist heater timer, the control recommends
the next active heater assigned to the timer in the clockwise direction. The
assignment recommendation is indicated by the flashing Cooking Zone
Indicator .
Touching and , the timer value for the heater can be set.
The running timer of the first set heater timer is indicated by the statically
lighting Cooking Zone Indicator .
Touching once again further timers can be assigned to other activated
heaters.
10 sec after the last operation, the timer display changes to the timer that will
run out next.
The assignment of that timer is displayed always by a flashing Cooking Zone
Indicator . How many timer are running you can identify by the number of
Cooking Zone Indicator that are statically on.
By toggling , you can display the timer values for the heater timer and the
minute minder. The assignment is always indicated by the flashing Cooking
Zone Indicator . If no Cooking Zone Indicator flashes, the minute minder time
is shown in the 2-digit Timer Display .