Finlux FXVT 60, Operating And Installation Instructions

Page: 13 / 48

12
Turn on dual- and triple zones (available only in some models)
Turn on the dual zone
The activation of the dual zone is done after selecting the desired heater by
actuating . This is confirmed by a buzzer signal. At the same time, the
corresponding Dual Zone Indicator goes on statically. Touching for a second
time, the status of the dual zone toggles: it changes from dual zone on to dual
zone off and back again.
The extension zone can be activated only, after a level between 1-9 is set on
the basic zone of the heater.
Turn on triple zones
A dual or triple zone can only be switched on, if the basic zone of a heater
is set to level 1–9 and the heater is selected, the dot is on.
If is pressed, the buzzer signal sounds and the Dual Zone Indicator is
statically on. If is pressed once again, there is another acoustical signal
and the triple heater is switched on. The Triple Zone Indicator will be illuminated
and the triple zone will be energized.
After touching once again, the triple zone of the heater will be switched
off again. Each operation causes a status change of the dual/triple zones
following in this manner (Dual zone on, triple zone on, all extended zones off,
dual zone on, triple zone on, dual zone on, etc. ...)
Set Cooking Level With and Without Heat Boost
Every heater is equipped with heat boost functionality.
If the heat boost is active, than the heater will be pressed with maximum
power for the period of the heat boost time, that is dependent from the selected
heat setting. This is indicated through a flashing ´A`, alternating with the heat
setting value (e.g. 0,5 sec ´A` and 0,5 sec ´9`) in the heater display. Once the
heat boost time ended only the heat setting will be indicated.
When a heater is activated, pressing in the cooking level 9 activates the
booster. After boost setting, ´A` will be indicated alternating. Means level 9
and heat boost is active now.