Finlux FXVT 60, Operating And Installation Instructions

Page: 14 / 48

13
The heat boost can be turned off by pressing until heat setting ´0` appears.
If the heat boost should be used, it can always be activated by actuating
again if the heat setting is set to level 9. In the heat display flashes “A/9”.
Turn Off Individual Heaters
A selective heater can be turned off with 3 different ways:
· Simultaneous operation of and buttons
· Reduction of the heat setting to „0“ by operating button
· Use of timer turn off function for the corresponding heater
Simultaneous operation of and buttons
The corresponding heater must be chosen with the Active/Deactive Heater
Button , the Decimal Point of the related Heater Display flashes. To turn
off the heater, and must be pressed at the same time. A buzzer signal
sounds and ´0` appears in the heat setting display.
An assigned Dual/Triple Zone Selection button also disappears if it is
active.
If the timer is active for the selected button, then ´0` will appear in the heater
display and also the related timer Cooking Zone Indicator Timer Function and
the Timer Display is turned off.
If there is a residual heat for this heater remaining, this will be indicated by
a static display ´H` in the heat setting display.
Reduction of the heat setting to ´0` by operating button
The heater can also be turned off by reducing the operated heat setting to
´0`.
When Heater Display indicates ´0`, an associated Decimal Point of the heater
will also be turned off.
Turning off an acitive heater, not only the ´0` appears in the Heater Display,
but also the related timer Cooking Zone Indicator and the Timer Display is
turned off.
If there is a residual heat for this heater remaining, this will be indicated by
a static display ´H` in the heat setting display.
Use of timer turn off function for corresponding heater (available only in some
models)