Finlux FCH-3070 Narcissus, User Instruction Manual

Page: 8 / 14

to standby.
8. Weekly timing function, the current time must be set first. For example, today is
Wed and time is 08:30, then Wed must be set first, and then the time setting must be
completed according to the operation of 2
8.1 Weekly timing settings:
a) Press the "on/off" button to turn on the heater, and press the "timing" button to
enter the timing setting (display setting content as shown in Figure 1)
b) Press the "timing" button to select the settings of "Mon to Suni", "24 hours 0~23
period", "heating temperature of the day 0~23 period" (select the setting item to
display flashing), press "increase" or "decrease" Press the key to adjust; press the
"Mode" key to select the "heating mode" for the period of 0~23 in the 1~7 days of the
week.
8.2 Working principle of weekly timing:
c) Such as: set Monday, 00 o'clock, heating temperature 28 degrees, heating mode 1
(single heating); Monday, 01 o'clock, heating temperature 25 degrees, heating mode
3 (dual heating);
d) In the heater working state: when the working time runs to the time of "Monday,
00:00~00:59 period", the heater works at a heating temperature of 28 degrees and
heating mode 1 (single heating); when When the working hours run to the time of
"Monday, 01:00~01:59", the heater works at a heating temperature of 25 degrees,
and heating mode 3 (dual heating); and so on.
9. Without cutting off the power, the above settings will be saved, no need to repeat