Finlux FCH-3070 Narcissus, User Instruction Manual

Page: 7 / 14

week, 1 means Mon
，
2 means Tue
，
3 means Wed 7 Means Sun
Repeatedly long press the 1 key “ ” for 5S, the time display hour digits will flash,
press the “ ” or “ ” key to select the current hour, and then repeatedly long press
the 1 key “ ” 5S, the time display minutes digits will flash, press “ ” or “
"Button to select the current minute, it will be automatically confirmed after 5S.
3.heating level setting
, press the 3 key “ ” again to select different gears: low gear
“ ”, high gear“ ”anti-frost“ ”.
4. Press the 4 key " ", the light is on, and the brightness of the light enters sleep
mode.
5. Long press the 5 key “ ” for 5S, the light will be on, and the keys on the display
will be locked.
6. Press the 6 key " ", the light turns on, and the product enters the window
opening mode. In this mode, when the ambient temperature drops by 5 degrees
within 10 minutes, it is regarded as the user has opened the window, the heater will
stop heating and enter standby mode.
7. temperature setting, y
ou can press the “ ” or “ ” key to set, the heater is
turned on by default and the temperature setting is 28
℃
. Each press increases or
decreases by 1
℃
. The temperature setting range is: 5-50
℃
; after setting Wait 5
seconds to display the current ambient temperature.
When the anti-frost mode is turned on, the heater will automatically turn on low-level
heating whe
n it detects that the ambient temperature is lower than 5°C. When the
ambient temperature is greater than or equal to 9°C, the heater will turn off and return