English
- 28 -
7KHORFDWඈRQZKHUHWKHWUDQVPඈVVඈRQඈVPRVWHIIHFWඈYH
GඈIIHUVGHSHQGඈQJRQWKHXVDJHHQYඈURQPHQW
7KH:ඈUHOHVVIHDWXUHRIWKH79VXSSRUWVDEJ
Q W\SH PRGHPV ,W ඈV KඈJKO\ UHFRPPHQGHG WKDW
\RX VKRXOG XVH WKH ,((( Q FRPPXQඈFDWඈRQ
SURWRFRO ඈQ RUGHU WR DYRඈG DQ\ SRVVඈEOH SUREOHPV
ZKඈOHZDWFKඈQJYඈGHRV
You must change your modem’s SSID when there
DUHDQ\RWKHUPRGHPVDURXQGZඈWKWKHVDPH66,'
<RXFDQHQFRXQWHUFRQQHFWඈRQSUREOHPVRWKHUZඈVH
8VHDZඈUHGFRQQHFWඈRQඈI\RXH[SHUඈHQFHSUREOHPV
ZඈWKDZඈUHOHVVFRQQHFWඈRQ
Configuring Wireless Device Settings
Open the
Network
menu and select
Network Type
as
W reless Dev ce
WRVWDUWFRQQHFWඈRQSURFHVV
+ඈJKOඈJKW
Scan W reless Networks
RSWඈRQDQGSUHVV
OK
WRVWDUWDVHDUFKIRUDYDඈODEOHZඈUHOHVVQHWZRUNV
$OOIRXQGQHWZRUNVZඈOOEHOඈVWHG+ඈJKOඈJKW\RXUGHVඈUHG
QHWZRUNIURPWKHOඈVWDQGSUHVV
OK
to connect.
Note: If the modem supports N mode, you should set N
mode settings.
,IWKHVHOHFWHGQHWZRUNඈVSDVVZRUGSURWHFWHGHQWHU
WKHFRUUHFWNH\E\XVඈQJWKHYඈUWXDONH\ERDUG<RXFDQ
XVHWKඈVNH\ERDUGYඈDWKHGඈUHFWඈRQDOEXWWRQVDQGWKH
OK
button on the remote control.
:DඈWXQWඈOWKH,3DGGUHVVඈVVKRZQRQWKHVFUHHQ
7KඈVPHDQVWKDWWKHFRQQHFWඈRQඈVQRZHVWDEOඈVKHG
7R GඈVFRQQHFW IURP D ZඈUHOHVV QHWZRUN KඈJKOඈJKW
Network Type
DQGSUHVV/HIWRU5ඈJKWEXWWRQVWRVHW
as
D sabled
.
You can save your wireless network profile using the
Save
option in the
Advanced Settings
menu. Thus
you wont need to enter your password whenever
you switch to wireless network. After connecting to
your wireless network highlight
Save
option in the
Advanced Settings
menu and press
OK
to save
your wireless network profile. If you have saved your
wireless network
Disconnect
option will appear in the
Network
menu. Highlight
Disconnect
and press
OK
to delete your wireless network profile.
If your router has WPS, you can directly connect to the
modem/router without entering a password or adding
the network first.
Highlight
Press WPS on your wifi
router
option and press
OK
. Go to your modem/router
device and press the WPS button on it to make the
connection. You will see a connection confirmation on
your TV once the devices have paired. Select
OK
to
proceed. No further configuration is required.
+ඈJKOඈJKW
Internet Speed Test
and press the
OK
button
WR FKHFN \RXU ඈQWHUQHW FRQQHFWඈRQ VSHHG +ඈJKOඈJKW
Advanced
Sett ngs
and press the
OK
button to
RSHQWKHDGYDQFHGVHWWඈQJPHQX8VHGඈUHFWඈRQDODQG
QXPHUඈFEXWWRඈJKOඈJKW
Save
and press the
OK
EXWWRQWRVDYHVHWWඈQJVZKHQFRPSOHWH
Other Informat on
7KH VWDWXV RI WKH FRQQHFWඈRQ ZඈOO EH GඈVSOD\HG DV
Connected
or
Not
Connected
and
the current IP
DGGUHVVඈIDFRQQHFWඈRQඈVHVWDEOඈVKHG
Connect ng to your mob le dev ce v a WLAN
,I\RXUPREඈOHGHYඈFHKDV
WLAN feature, you can
FRQQHFWඈWWR\RXU79YඈDDURXWHUඈQRUGHUWRDFFHVV
WKH FRQWHQW ඈQ \RXU GHYඈFH )RU WKඈV \RXU PREඈOH
GHYඈFHPXVWKDYHDQDSSURSUඈDWHVKDUඈQJVRIWZDUH
&RQQHFW\RXU79WR\RXUURXWHUIROORZඈQJWKHVWHSV
PHQWඈRQHGඈQWKHVHFWඈRQVDERYH
$IWHUZDUGVFRQQHFW\RXUPREඈOHGHYඈFHWRWKHURXWHU
DQGWKHQDFWඈYDWHWKHVKDUඈQJVRIWZDUHRQ\RXUPREඈOH
GHYඈFH7KHQVHOHFWIඈOHVWKDW\RXZDQWWRVKDUHZඈWK
your TV.
,I WKH FRQQHFWඈRQ ඈV HVWDEOඈVKHG FRUUHFWO\ \RX ZඈOO
EHDEOHWRDFFHVVWKHVKDUHGIඈOHVඈQVWDOOHGRQ\RXU
PREඈOH GHYඈFH YඈD WKH$XGඈR 9ඈGHR 6KDUඈQJ $96
feature of your TV.
+ඈJKOඈJKWWKH
AVS
RSWඈRQඈQWKH
Sources
menu and
press
OK
DYDඈODEOH PHGඈD VHUYHU GHYඈFHV ඈQ WKH
QHWZRUNZඈOOEHGඈVSOD\HG6HOHFW\RXUPREඈOHGHYඈFH
and press the
OK
EXWWRQWRFRQWඈQXH
If available, you can download a virtual remote
controller application from the server of your mobile
device application provider.
Note: This feature may not be supported on all mobile
devices.
Networked Standby Mode
Networked Standby Mode
is a standard that allows
a device to be turned on or woken up by a network
message. The message is sent to the device by a
program executed on a remote device connected to
the same local area network, such as a smartphone.
To enable this feature set the
Networked Standby
Mode
option in the
Network
menu as
On
. It is
necessary that both the device, from which the
network message will be sent to the TV, and the
TV are connected to the same network. Networked
Standby Mode feature is only supported for Android
OS devices and can only be used via YouTube and
Netflix applications.
In order to use this feature the TV and the remote
device should be connected at least once while the
TV is on. If the TV is powered off, the connection
should be re-established, the next time it is switched
on. Otherwise this feature will be unavailable. This
does not apply, when the TV is switched into the
standby mode.
If you want your TV to consume less power in standby
mode, you can disable this feature by setting the
Networked Standby Mode
option as
Off
.
English
- 29 -
Wireless Display
Wireless Display is a standard for streaming video and
sound content. This feature provides the ability to use
your TV as wireless display device.
Using with mobile devices
There are different standards which enable sharing of
screens including graphical, video and audio content
between your mobile device and TV.
Plug the wireless USB dongle to TV first, if the TV
doesn’t have internal WLAN feature.
Then press the
Source
button on the remote and
switch to
Wireless Display
source.
A screen appears stating that the TV is ready for
connection.
Open the sharing application on your mobile device.
These applications are named differently for each
brand, refer to the instruction manual of your mobile
device for detailed information.
Scan for devices. After you select your TV and connect,
the screen of your device will be displayed on your TV.
Note: This feature can be used only if the mobile device
supports this feature. If you experience problems with the
connection check if the operating system version you use
supports this feature. There may be incompatibility problems
with the operating system versions which are released after
the production of this TV. Scanning and connecting processes
differ according to the programme you use.
Connecting Other Wireless Devices
Your TV supports another short range wireless
connection technology too. A pairing is required before
using these kind of wireless devices with the TV set.
You should do the following to pair your device with
the TV:
Set the device to pairing mode
Start device discovery on the TV
Note: Refer to the user manual of the wireless device to learn
how to set the device to pairing mode.
You can connect audio devices or remote controllers
wirelessly to your TV. Unplug or switch off any
other connected audio device in order for wireless
connection feature to work correctly. For audio
devices you should use the
Audio Link
option in the
Settings>Sound
menu, for remote controllers the
Smart Remote
option in the
Settings>System>More
menu. Select the menu option and press the
OK
button
to open the related menu. Using this menu you can
discover and connect the devices that use the same
wireless technology and start to use them. Follow the
on-screen instructions. Start the device discovery. A
list of available wireless devices will be displayed.
Select the device you want to connect from the list and
press the
OK
button to connect. If “
Device connected
”
message is displayed, the connection is successfully
established. If the connection fails try it again.
Image transfer and audio streaming
You can also use this type of connection to transfer
images or stream audio from your mobile device to
your TV.
Pair the mobile device and the TV as described before.
Start a device search in your hand-held device. Select
your TV from listed devices. Confirm the request for
connection on your TV screen and do the same on
your hand held device screen. If no pairing is done,
image transfer or audio streaming to the TV will not
be possible.
The images sent by mobile device will be displayed
on the TV without confirmation request, if the image
file is suitable. You can also save the image file to a
connected USB memory drive or set as boot logo, if
this feature is supported and the file is suitable. Press
the
Exit
button to terminate displaying the image.
The audio will be routed through the speakers of
the TV, after confirmation is given. To start audio
streaming unpair the device from your TV if it is paired
with your TV previously. After pairing is completed, a
confirmation message will be displayed asking whether
you want to start audio streaming from your mobile
device. Select
Yes
and press the
OK
button on the
remote of the TV. If the connection is succeeded, all
audio will be routed through the speakers of the TV. A
symbol will appear on the upper side of the TV screen
as long as the audio streaming connection is active. To
terminate the audio streaming, you should turn off the
wireless connection of your mobile device.
Close all running applications and all the menus on
the TV for a trouble-free transfer. Only image files with
sizes smaller than 5 MB and in the following file formats
are suitable;
.jpg, .jpeg, .png, bmp
. If a file sent by the
mobile device does not suit these requirements, it will
not be displayed on the TV.
If the
AVS
option in the
Settings>System>More
menu
is disabled, the TV will ignore pairing requests and no
information message will be displayed on the screen.
If a device is already paired prior to disabling the
AVS
option, it will be able to continue sharing audio/video
with the TV even if the
AVS
option is disabled.
Note: Wireless devices may operate within the same radio
frequency range and may interfere with one another. To
improve the performance of your wireless device place it at
least 1 meter away from any other wireless devices.
Connectivity Troubleshooting
Wireless Network Not Available
Ensure that any firewalls of your network allow the
TV wireless connection.
7U\VHDUFKඈQJIRUZඈUHOHVVQHWZRUNVDJDඈQXVඈQJWKH
Network
menu screen.
If the wireless network does not function properly, try
using the wired network in your home. Refer to the
