English
- 37 -
To cancel mute, there are two alternatives; the
first one is pressing the
button and the
second one is increasing the volume level.
PIP (Picture-in-Picture) and PAP
(Picture-and-Picture) Modes
Press the
button to switch to PIP mode.
At PIP Mode, a small picture (PIP picture) is
displayed on the main picture. Aspect Ratio of
the PIP window is fixed and 4:3.
When PIP Mode is entered, the default active
window is the PIP window and the active
window is indicated by a white frame around
it. The active window can be changed by
pressing
/
button. The status info OSD
belongs to active window. The place of the
status OSDs are same for both windows.
Press the
button again to to PAP mode.
At PAP Mode, two pictures with equal sizes
are displayed on the screen. Aspect Ratios of
the windows are fixed.
When you switch to PAP Mode, Main window
in PIP Mode is displayed on the right side of
the screen. The active window can be
changed by pressing
/
button.
Press the
button again to exit the PAP
mode.
NOTE
: In all HDMI modes, PIP and PAP are not
visible. In YPbPr 1080i, PIP is not visible.
NOTE:
See Appendix B for all PIP/PAT modes.
Freezing Picture
You can freeze the picture on the screen.
Press the
OK
button to freeze picture. Press
again to quit freeze mode.
Zoom Modes
You can change the aspect ratio of the TV for viewing
the picture in different zoom modes.
Press
button to directly change the zoom mode.
Available zoom modes are listed below.
Note
: In
YPBPR
and
HDMI
modes,while in 720
and 1080 resolutions,
Full 1
and
Full 2
modes will also be visible.
Auto
When a
WSS (Wide Screen Signalling)
signal, which shows the aspect ratio of the
picture, is included in the broadcast signal or
the signal from an external device, the TV
automatically changes the
ZOOM
mode
according to the
WSS
signal.
• When the
AUTO
mode does not function
correctly due to poor
WSS
signal quality or
when you want to change the
ZOOM
mode,
change to another
ZOOM
mode manually.
Full
This uniformly stretches the left and right sides
of a normal picture (4:3 aspect ratio) to fill the
wide TV screen.
• For 16:9 aspect ratio pictures that have been
squeezed into a normal picture (4:3 aspect
ratio), use the
Full
mode to restore the picture
to its original size.
4:3
Use to view a normal picture (4:3 aspect ratio)
as this is its original shape.
Panoramic
This stretches the left and right sides of a
normal picture (4:3 aspect ratio) to fill the
screen, without making the picture appear
unnatural.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p65
27.09.2007, 16:46
37
