![Finlux 37FLHD760 Owner'S Manual Download Page 30](http://html1.mh-extra.com/html/finlux/37flhd760/37flhd760_owners-manual_2290035030.webp)
English
- 29 -
Obtain the Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the
Television using the following procedure.
• Switch off the TV and unplug from the mains.
• Insert the CAM, and then the viewing card to
the slot that is located in the terminal cover
at the left-hand side of the TV (from front
view).
• The CAM should be correctly inserted, it is
impossible to insert fully if reversed. The
CAM or the TV terminal may be damaged if
the CAM is forcefully inserted.
• Connect the TV to the mains supply, switch
on and then wait for few moments until the
card is activated.
• Some CAMs may require the following set
up. Please set the CAM by entering the IDTV
menu, Common Interface then pressing
OK
button. (CAM set up menu is not displayed
when it is not required.)
•To see the viewing contract information:
• Enter IDTV; press
M
button, then highlight
Common Interface
and press
OK
button.
• When no module is inserted, “
No Common
Interface module detected
” message
appears on the screen.
• Refer to the module instruction manual for
details of the settings.
NOTE
: Insert or remove the CI module only
when the TV is in
STAND-BY
mode or
SWITCHED OFF
.
Menu System
Picture Menu
PICTURE
Mode
Contrast
Brightness
Sharpness
Colour
Colour Temp
Noise Reduction
Film Mode
Store
Reset
Dynamic
63
63
31
99
Normal
Low
Off
NO SIGNAL
Mode
For your viewing requirements, you can set
the related
mode
option.
Press or button to select
Mode
. Press
or
button to choose from one of these
options:
Cinema, Dynamic
and
Natural.
Contrast/Brightness/Sharpness/Colour/
Hue
Press or button to select the desired
option. Press
/
button to set the level.
Note
:
Hue
option can only be visible when
the TV receives an NTSC signal.
Colour Temp
Press or button to select
Colour Temp
.
Press
/
to choose from one of these
options:
Cool, Normal
and
Warm
.
Note
:
• Setting
Cool
option gives white colours a
slight blue stress.
• Setting
Warm
option gives white colours a
slight red stress.
• For normal colours, select
Normal
option.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p65
27.09.2007, 16:46
29