background image

English

   - 2 -

 

WARNING: Never let people (including 

children) with reduced physical, sensory or 

mental abilities or lack of experience and / or 

knowledge use electrical devices unsupervised.
Children may not recognize dangers of incorrect 

use! The swallowing of batteries can be fatal. 

Keep batteries always out of reach of small 

children. If a battery is swallowed, immediately 

seek medical attention. Keep the packaging 

films out of reach of children to prevent the risk 

of suffocation.

Power source

• The TV should be operated only from a 220-240 V 

AC, 50 Hz outlet. 

• 

 

Warning:

 

Do not

 leave your TV in standby or 

operating mode when you leave your house.

Positioning the TV

• For ventilation, please leave a clear space of at least 

10cm all around the TV. 

• Do not 

block the ventilation openings. 

• Do not

 place the TV on sloping or unstable surfaces, 

the TV may tip over.

• To prevent damage to the TV, 

do not

 place any 

objects on top of the TV.

• Only use the TV in moderate climates.

Power cord and plug

• The power cord plug should be easily accessible. If 

there is lightning or storms, or if the TV is not going 

to be used for a while (e.g. if going away on holiday), 

disconnect the TV set from the mains.

• The mains plug is used to disconnect TV set from the 

mains and therefore it must remain readily operable.

• Do not 

place the TV, furniture, etc. on the power 

cord or pinch the cord. 

• Handle the power cord by the plug, 

do not

 unplug 

the TV by pulling the power cord.

• Never touch the power cord/plug with wet hands 

as this could cause a short circuit or electric shock. 

• Never make a knot in the power cord or tie it with  

other cords. 

• Power cords should be placed in such a way that 

they are not likely to be stepped on or provide a 

trip hazard. 

• A damaged power cord/plug can cause fire or give 

you an electric shock. When damaged it must be 

replaced,  this  should  only  be  done  by  qualified 

personnel.

Safety Precautions

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. 

 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. 

 

 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. 

 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. 

 

 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. 

 

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. 

 

The  lightning  flash  with  arrowhead  symbol,  within 

an equilateral triangle, is intended to alert the user 

to the presence of uninsulated “dangerous voltage” 

within the product’s enclosure that may be of sufficient 

magnitude to constitute a risk of electric shock of 

persons.
The exclamation point within an equilateral triangle is 

intended to alert the user to the presence of important 

operating and maintenance (servicing) instructions in 

the literature accompanying the appliance.

Please read these instructions fully
 before installing or operating.

Preparation

Place the device on a solid even surface. For 

ventilation

 purposes,

 leave a free space of at least 

10 cm all around the set. To prevent any fault and 

unsafe situations, do not place any objects on top 

of the set. Use this device in moderate climates.

Operation temperature and operation humidity:  

5ºC up to 45ºC, 85% rel. humidity max. (Note: Don’t 

block ventilation holes.).

Intended Use

This device is used to receive and display TV 

programmmes , as well as to play CDs and DVDs (see 

“This device compatible disc types”).The different 

connection options make an additional expansion of 

the reception and display sources possible (various 

external devices). This device is only suitable for 

the operation in dry interiors. This 

appliance is intended solely for private 

domestic use and may not be used for 

industrial and commercial purposes. 

We exclude liability in principle, if the 

device is not used as intended, or unauthorized 

modifications have been made. To operate your TV 

in extreme ambient conditions may cause damage 

of the device.

Summary of Contents for 32F8072-T










































Reviews: