Finlux 24-FWAF-9550-12, Owner'S Manual

Page: 38 / 56

English - 6 -
Other Connections
,I\RXZDQWWRFRQQHFWDGHYLFHWRWKH79PDNHVXUHWKDWERWKWKH79DQGWKHGHYLFHDUHWXUQHGRႇEHIRUHPDNLQJ
any connection. After the connection is done, you can turn on the units and use them.
Connector Type Cables Device
COMPONENT
Component
Video
Connection
(back) VGA to Component Connection Cable
HDMI
Connection
(back&side)
VGA
Connection
(back)
AUDIO IN
VGA/
Component
Audio
Connection
(back)
Component/VGA Audio Cable
SPDIF
SPDIF
(Coaxial Out)
Connection
(back)
COMPOSITE
Composite
(Audio/Video)
Connection
(back) Audio Video Cable
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(side)
CI
Connection
(side)
CAM
module
12V DC
Connection
(back)
DC 12V Input
To enable VGA/Component audio,
you will need to use the back
audio inputs with a VGA/Com-
ponent audio cable for audio
c o n n e c t i o n . When using the
wall mounting kit (contact your
dealer to purchase one, if not
supplied), we recommend that
you plug all your cables into the
back of the TV before mounting
on the wall. Insert or remove
the CI module only when the TV
is SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
The USB inputs on the TV support
devices up to 500mA. Connecting
devices that have current value
above 500mA may damage your
TV. When connecting equipment
using a HDMI cable to your TV,
WR JXDUDQWHH VX௻FLHQW LPPXQLW\
against parasitic frequency radia-
tion and trouble-free transmission
RIKLJKGH¿QLWLRQVLJQDOVVXFKDV
4K content, you have to use a high
speed shielded (high grade) HDMI
cable with ferrites.
English - 7 -
Turning On/Off the TV
Connect power
IMPORTANT
: The TV set is designed to operate on
a 12 V DC supply. For this, an adaptor is used which
gives 12 V voltage.
After unpacking, allow the TV set to reach the ambient
room temperature before you connect the set to the
mains.
Connect the supplied adaptor to a system that
supplies
100-240V AC, 50/60Hz . The TV will switch
on automatically.
In order to supply the power via the cigarette lighter
socket of your vehicle, plug one end of the cigarette
lighter adaptor cable (car plug - can be purchased
separately if not supplied with the TV) into the vehicle
socket and plug the other end of the adaptor cable
into the DC 12V terminal on the back side of the TV.
Be sure to ground the connection
properly
Connect the ground terminal of the AC
adaptor with the ground terminal provided at
the power outlet using the enclosed power
FRUG,IWKHSURYLGHGSOXJGRHVQRW¿W\RXU
outlet, consult an electrician for replacement
of the obsolete outlet.
Surely connect the ground wire.
To switch on the TV from standby
If the TV is in standby mode the standby LED lights
up. To switch on the TV from standby mode either:
‡ Press the Standby button on the remote control.
‡ Press the centre of the control switch on the TV in.
The TV will then switch on.
To switch the TV into standby
The TV cannot be switched into standby mode via
control switch. Press and hold the
Standby button on
the remote control. 3RZHURႇ dialogue will appear on
the screen. Highlight OK and press the OK button. The
TV will switch into standby mode.
7RVZLWFKRႇWKH79
To power down the TV completely, unplug the power
adaptor from the mains socket.
Quick Standby Mode
In order to switch the TV into quick standby mode
either;
‡ Press the Standby button on the remote.
Press again to go back to operating mode.
‡ Press the centre of the control switch on the TV in
and hold it down for a few seconds.
Press again to go back to operating mode.
TV Control & Operation
The control switch allows you to control the Programme
and Quick Standby-On functions of the TV.
Note:
7KHSRVLWLRQRIWKHFRQWUROVZLWFKPD\GL௺HUGHSHQGLQJ
on the model.
To change channel in Live TV mode: Press the
centre of the control switch in, the information banner
will appear on the screen. Scroll through the stored
channels by pushing the control switch up or down.
7RWXUQWKH79Rႇ4XLFN6WDQGE\ Press the centre
of the control switch in and hold it down for a few
seconds, the TV will turn into quick standby mode.
7R WXUQ WKH 79 Rႇ 6WDQGE\ The TV cannot be
switched into standby mode via control switch.
To turn on the TV: Press the centre of the control
switch in, the TV will turn on.
Note: Live TV settings menu OSD in Live TV mode cannot be
displayed via control switch.