English
- 106 -
Note: If you select an extended gap between Start
and Stop frequency rate, automatic search duration
will take a longer time.
After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen: Operation of
analogue channel installation is explained in
“Automatic Channel Scan” section above.
Frequency Search
Enter the desired frequency, Modulation and symbol
rate numbers. Modulation can be set as Auto, 16QAM,
32QAM, 64QAM, 128QAM and 256QAM.
When fi nished, press
OK
button, and the TV will start
frequency search.
Network Search
When you select Network Search line and press
OK
button, the following menu screen will be displayed
on the screen:
Enter
Start and Stop frequency ranges
that you
want to search within. After this operation, you
can set
Search Step
as
8000
KHz or
1000
KHz.
If you select 1000 KHz, the Tv will perform search
process in a detailed way.Searching duration will
thus increase accordingly. When fi nished press
OK
button to continue. The process will then start. During
the
Network Search
, if channels that have network
search info are found, the TV will automatically show
the frequencies of those channels and network search
process will end by locating those channels.
After search is completed, a message asking whether
to search for analogue channels appears on the
screen: Operation of analogue channel installation
is explained in “Automatic Channel Scan” section
above.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “
” or “
” button to select Clear Service List and then
press
OK
. The following OSD will be displayed on
the screen:
Press
OK
to cancel. Select
Yes
by pressing “ ” or “ ”
button and press
OK
to delete all of the channels.
First Time Installation
The user can use this item to load default settings,
which were loaded to the receiver at the factory.
To install factory settings, highlight “
First Time
Installation
” menu item and press
OK
button, then
you will be asked whether or not to delete the settings.
Selecting “
Yes
” by pressing
OK
button will delete the
existing channel table.
After factory settings are loaded, “
First Time
Installation
” menu will be displayed.
The menu which is displayed for language selection
appears on the screen at fi rst. By using “
” or “
” buttons, select the desired language option,
and press
OK
button to activate. After then, “First
time installation” OSD will appear on the screen.
By pressing “ ” or “ ” buttons, select the
Country
you want to set and press
OK
button (* only for EU
countries). Next, active antenna mode selection OSD
will appear on the screen. Use “ ” or “ ” to set and
press
OK
to continue. See the section, “Initial Settings”
for more information. After active antenna mode option
is selected, a message asking for automatic search
appears on the screen:
Highlight “
Yes
” item by pressing “ ” or “ ” buttons
and press
OK
button to start installation. • To select
the “Yes” or “No” option, highlight the item by using “
” or “ ” buttons and press
OK
button.
After then, the following OSD will be displayed on
the screen:
If you select
CABLE
option, the following screen will
be displayed:
A03_MB37_[GB]_(01-TV)_1900UK_IDTV_TC_BRONZE13_MOBIL_TV_19841W_10067241_50162921.indd 20
A03_MB37_[GB]_(01-TV)_1900UK_IDTV_TC_BRONZE13_MOBIL_TV_19841W_10067241_50162921.indd 20
01.02.2010 18:08:21
01.02.2010 18:08:21
