38
Using the Lanyard
A Lanyard is included in the scope of delivery of the
MedX5
Pulse Oximeter M70C
. You
may attach it to the device by
threading the thinner end of the lanyard through the hanging
hole on the left side of the device.
Troubleshooting
Error:
SpO
2
and / or pulse frequency values are not displayed resp. are not displayed correctly.
Remedying:
Place on of your fingers completely into the finger opening
③
on the backside of the
device. Use a new battery. Do not move
or speak during the measurement. If still no correct values
can be measured, contact the service centre.
Error:
The device cannot be switched on.
Remedying:
Remove the old battery and insert a new one. Press the START-button
②
. If the device still cannot be switched on, contact the
service centre
