FingerTec TA100 DIY SERIES User Manual Download Page 49

Page: 49 / 56

This Chapter is meant for qualified installer only.

The installation of reader shall be handled by a

well-trained installer. If you are not a qualified in-

staller, you can ignore this Chapter or this Chapter

serves as a reference for all types of connections

available for the reader only.

NOTE

•

OPTIONAL

The TA100 DIY does not require any software to manipulate and analyze its data. There-

fore, TA100 DIY does not come with any software CD and does not communicate with

PC.
If you feel that the features of TA100 DIY is no longer suffice to support your company’s

requirements, and wish to upgrade to FingerTec® software, TCMS V2, the TA100 DIY could

be changed to adopt the software with an upgrade of the firmware and you can connect

the reader to PC via LAN CAT 5 cable. Once the upgrade process is done, all features of

TA100 DIY will be erased completely and you must refer to the TA100 User Manual for

more details in functions and operations. Please refer to your local reseller for more details

or email us at

[email protected]

Summary of Contents for TA100 DIY SERIES

























































Search results

Summary of Contents for TA100 DIY SERIES

Reviews:

Related manuals for TA100 DIY SERIES

Brands by name

Popular brands

FingerTec TA100 DIY SERIES, User Manual

Search results

Summary of Contents for TA100 DIY SERIES

Reviews:

Related manuals for TA100 DIY SERIES

Brands by name

Popular brands