FingerTec TA100 DIY SERIES User Manual Download Page 18

Page: 18 / 56

Place the enrolled finger

properly on the finger-

print sensor.

Wait a second before

removing the finger from

the fingerprint sensor.

Welcome Check-In

09:00

01.01.09

FP Verify
User ID 00001
Verifi ed

FP Verify

Please Try Agn.

FP Verify

Remove fi nger

Reader verifies that the

User ID is 00001.

If a finger failed to be

verified by the reader, it

will prompt the user to try

again.

Input

OK ESC

New User

Name: Mary

Finger 2
Dept NO

Save ?

000000002

ESC OK(Save)

User Mng

Name User

Viewing User
Dept Mng

Input

Mary

OK ESC

Input the names of

Administrator.
Please refer to page 6

for T9 input method.

Press once to

save the name.

ESC

Press Once

Press once to

save

settings

ESC

Press twice to

return to the main

menu.

* Please ignore this step if name was not

required in the report. If it was mandatory,

please continue.

Repeat the above steps to enroll more users into the reader.

FINGERPRINT VERIFICATION

Reader supports 2 types of fingerprint verification method. User can choose either method

to verify his fingerprint at the reader. 2 types of fingerprint verification methods are:

• 1 to Many (1:N) fingerprint matching
• 1 to 1 (1:1) fingerprint matching

1 TO MANY (1:N) FINGERPRINT MATCHING

Summary of Contents for TA100 DIY SERIES

























































Search results

Summary of Contents for TA100 DIY SERIES

Reviews:

Related manuals for TA100 DIY SERIES

Brands by name

Popular brands

FingerTec TA100 DIY SERIES, User Manual

Search results

Summary of Contents for TA100 DIY SERIES

Reviews:

Related manuals for TA100 DIY SERIES

Brands by name

Popular brands