FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY
2283
USER MANUAL
22/01/2010 12:52 PM
AT
UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN
ver1.doc
5/27
------------------------------------------------------------------
Finero Oy
–
The Quality Control Company
Tel. +358-5-7522 200
Haltonintie 5, FIN-47400 KAUSALA, FINLAND
Fax +358-5-3638 326
www.qacontrol.com
1 TECHNICAL INFORMATION
Type:
FST-DCP-1500-05
Serial number:
See back of device
Size:
483x148x410 (width, height, depth)
Designed to 19”
-eurorack, height 3U 133mm, without legs
Weight:
about 25 kg
Operation voltage:
230VAC (
10%) 50Hz 1~phase
Operation power:
800VA
Connection:
Cable plug, equipment earth
Main fuses:
4A slow 5x20mm glass inside of power connector
Environment temperature:
+5°C...+35°C
Environment conditions:
Dry and no dusty
Output voltage:
0V...2000V dc voltage (not filtered, only rectifier)
Meter 0...2000V, analogy meter reading 50V
Output current:
max. 1000mA, max power 750VA
Measurement range:
0...1000mA
Output connections:
Back high voltage sockets
Remote control:
Start, stop, test, fail and safety circuit 24VDC
D25-female -connector in back panel
Computer connection:
RS-232 (assessor) D9 female-connector or IEE488 (asses-
sor) or USB(A) (assessor) in back panel. Board can use
controlled other FST-series tester.
Tester control connector:
Modular Cat5 8-pin connector 2pcs. This device are possi-
ble connection to other FST-series tester (where RS-232
or IEE488 or USB-board are), then are possible control
this device via computer.
