FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY
2283
USER MANUAL
22/01/2010 12:52 PM
AT
UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN
ver1.doc
14/27
------------------------------------------------------------------
Finero Oy
–
The Quality Control Company
Tel. +358-5-7522 200
Haltonintie 5, FIN-47400 KAUSALA, FINLAND
Fax +358-5-3638 326
www.qacontrol.com
ATTENTION
THE MEASURING HEADS HAVE DANGEROUS HIGH VOLTAGE
6 OPERATION WITH COMPUTER
6.1 General
This means control of the tester by user interface of a computer. The tester can be included in
automatic test systems providing automatic recording of the test results and other applica-
tions. All operations are controlled by the computer using commands or easier by using a
specific application program Finero Safetest. The command lists for computer operation
mode are appendix of this manual. The control board RS-232 or IEE488 or USB are accessory
and its must be ordered separately. There are nor
mal only “FST
-
tester port”, which means
that tester can be controlled with other FST-series tester (where are communication board)
6.2 Connections
There is 8-pins modular connector for FST-tester port. Connection to other tester must be
done shielded Cat5 cables (STP). If there is RS-232 communication board, there are female 9-
pins D-connector. IEE488 communication board uses 24-pins connector. USB uses type A
female connector. Other FST-series testers can be connected this tester and controlled with
one computer.
6.3 Control software
There are available some software, which make controls easier. Programs are accessory and
they manuals are inside in Help-menu.
