FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY
2283
USER MANUAL
22/01/2010 12:52 PM
AT
UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN
ver1.doc
21/27
------------------------------------------------------------------
Finero Oy
–
The Quality Control Company
Tel. +358-5-7522 200
Haltonintie 5, FIN-47400 KAUSALA, FINLAND
Fax +358-5-3638 326
www.qacontrol.com
RS-parameter: Baund rate 19200, 8 data bits, 1 stop bit, no parity
Summary of Tester Commands:
DCP
Commands are use to FST-DCP tester
VOLTage 1000
Voltage set value 0...2000 (=0…2000V)
CURRent:MAXimum 90
Current high limit 100…990 (=10mA…990mA)
RAMPtype 0
Voltage increase or decrease type (1=up, 2=up and down)
RLENght 5
Voltage increase or decrease time (0;4…30sec)
ON
Test voltage on
OFF
Test voltage off
ALARm:ON
Tester alarm (software)
ALARm:OFF
Tester alarm off (software)
OUT1:ON
External control OUT1 ON or OFF
OUT2:OFF
External control OUT2 ON or OFF
IDN””
Tester identify code, maximum 20 characters
RES?
Results: Current, voltage, status and test time
CURR?
Measurement current
VOLT?
Measurement voltage
STAT?
Tester status
TIM?
Test time and hole test time in 1/10 minutes (0…9999)
OUT?
External controls output 1 and 2 status
IN?
External control input 1 and 2 status
CAL?
Tester testing/setting date
VER?
Tester version
IDN?
Tester identify code
