4
Preparation
Recommended Equipment List
•
Variable speed drill
•
Drill bit:
⅛”
(for guidance)
¼” (to drain) and ½” (for tap)
•
Pliers
•
Phillips screwdriver
•
Plastic tube cutter / Stanley Blade
The unit is supplied with white tubing which is to be cut to length
through each stage of installation.
The inlet to the unit is the larger pipe which is 3/8” size and the
smaller is the output tubing which is ¼” size.
Mark 1 (WHITE stopper)
– Cold water supply to RO system
Mark 2 (BLACK stopper)
– Wastewater to drain
Mark 3 (YELLOW stopper)
– Do not remove unless you are
connecting to a pressurised storage tank.
Mark 4 (BLUE stopper)
– Last stage on RO system to water outlet.
Fittings included
