User Manual EM737
Document code: Fineco737-1-1.1 Revision2.003
Shanghai fangqiu electric CO.,LTD. Email:
1.
Safety notice
Th
e smart energy meter of EM737 does not require special mechanical or electrical
tools for its installation. Mounting position (with any angle of tilt) has no effect on the
measurement functions of th
e meter.
Connecting of the meter must be made according to applicable wiring diagram. Incorrect
connection of the meter to the electricity network causes major display problem and can
also causes serious damage to the meter. Before starting meter operation, it must be
ensured the local conditions of the energy system are consistent with data on the nameplate
of the meter. Preferably use for the connection of shielded cables. Make sure that
connecting cables are not damaged during installation of the meter are not energized and
free of non-mechanical stress.
Repairs when removing the cover of the meter, which is also under tension can be made
only by a qualified electrician who is familiar with the associated risks. Capacitors in the
meter may still be charged even if the meter is disconnected from all energy sources.
2.
Content of delivery
Three phase, electronic energy meter, instructions for assembly
ID setting
Baud rate setting
CT rate setting
Password setting
3.
EC Type Examination Certificate
