Fimer Tp 72, Instruction Manual

Page: 7 / 20

910.100.276GB REV00 7 di 28
INSTRUCTION MANUAL
Fimer S.p.A. thanks you for selecting this unit: It will prove to be a useful, problem-free tool for many years to come if
the instructions contained in this manual are followed scrupulously.
This manual must be considered as an integral part of the unit and must accompany it when it change location or is
resold.
The user must assume responsibility for maintaining this manual intact and legible at all times.
Fimer S.p.A. reserves the right to modify this manual at any time without notice.
All rights of translation and total o partial reproduction by any means whatsoever (including scanner, photocopy, film
and microfilm) are reserved and reproduction is prohibited without the express written consent of Fimer S.p.A.
WARNING.........................................................................................................................................................................................3
SAFETY RULES ...............................................................................................................................................................................8
PRECAUTIONS ................................................................................................................................................................................8
PRESSURE REGULATOR: ............................................................................................................................................................9
OVERVIEW ......................................................................................................................................................................................9
HOW TO START............................................................................................................................................................................10
LAY-OUT ........................................................................................................................................................................................10
PUTTING IN SERVICE AND USE ..............................................................................................................................................10
OPERATOR PANEL......................................................................................................................................................................12
REMOTE CONTROL CONNECTOR .........................................................................................................................................13
IGNITION........................................................................................................................................................................................13
ADJUSTMENTS .............................................................................................................................................................................14
SAFETY TORCH............................................................................................................................................................................14
CUTTING DRAWBACK ..............................................................................................................................................................14
PRACTICAL ADVICE...................................................................................................................................................................14
PRACTICAL ADVICE...................................................................................................................................................................15
SCHEMATIC DIAGRAM .............................................................................................................................................................16
SPARE PARTS................................................................................................................................................................................17