20
DAILY MAINTENANCE
CLEANING THE RECOVERY TANK
-
Open the hood and keep it lifted using its support
-
Remove the drain tube from its seat. Empty the tank through the drain tube by turning
the knob a few turns and then pulling out the plug
-
Remove the tank cover, releasing it from retaining clips (1)
-
Rinse the inside of the tank thoroughly with a jet of water. Slightly lift the tank, using its
handle, to improve dirt removal. It is best to do this after totally removing the tank
from the machine
-
Put the tank back in the machine and put the plug back on the drain tube
WARNING! This operation must be performed using gloves to
protect themselves from contact with dangerous solutions.
CLEANING THE RECOVERY TANK FILTER
-
Remove plug (1) from the recovery tank cover
-
Pull out the filter with its foam-protection unit
-
Turn the filter inside the foam-protection unit counter-clockwise to release it and pull it
out
-
Use a jet of water to clean the walls and the bottom of the filter. Clean all parts
thoroughly and carefully
-
Replace everything by following the above indicated procedure in reverse order
WARNING! Do not enter water in the pipe connected to the filter
cover.
WARNING! This operation must be performed using gloves to
protect themselves from contact with dangerous solutions.
