26-1135 Issue 1
6. Secure the expansion card PCB to the unit
’s base using the 4 off M3 x 6 screws supplied.
Please note the orientation of the expansion card PCB.
7. Plug one end of the ribbon cable assembly into the expansion card PCB (this will only fit one way).
8. Flip the left hand CIE assembly back over anti clockwise and plug the other end of the ribbon cable
assembly into the connector marked (expansion connector) on the CIE PCB (again this will only fit one
way).
9. Slide the CIE assembly onto the base moulding (ensure that the CIE assembly moulding engages into the
clips on the base moulding and that all cables ends are accessible for termination) and secure into position.
