1
General Notes
•
The T360 Series has been designed for professional studio and location applications and may only
be operated by qualified persons.
•
Please read the following operating instructions very carefully before using this fixture.
•
For your own safety, please follow all safety instructions and warnings.
•
Keep these operating instructions for future reference.
•
For further information, contact Fiilex ([email protected]) or your retailer.
Basic Operation
(refer to Parts Diagram on following page)
• Mounting
T360 fixtures can be mounted to a Eutrac track system via its integrated Eutrac Multi-Adapter
(18). For more information on track components and how to mount the track, please visit
www.fiilex.com or call us at (510) 620-5155.
• Powering On
The T360 Series comes with its own integrated Power Module Box (6). To supply a T360 Series
fixture with power, insert the Eutrac Multi-Adapter (18) into a Eutrac system. The fixture’s OLED
Display (17) will turn on once it is receiving power. The On/Off Button (13) can toggle the fixture’s
output on and off. Settings can still be adjusted while the switch is set to off.
• Adjusting the Position
Use the Yoke Knobs (2) to lock the fixture’s tilt position. Tighten the handle to secure.
• DMX Interface
Both fixtures are DMX512 compatible, allowing users to operate them remotely via the Fiilex
DMX Controller (or any standard DMX board).
Mode
Manual
Red/Green
Directly adjust the light’s output via the control knobs. Press
the On/Off Button to toggle the fixture’s output on and off.
Red: Light output off - Settings are still adjustable
Green: Light output on
Control via DMX. Manual control knobs become disabled.
DMX Mode activates automatically when a signal is detected.
Orange
DMX
Description
On/Off
Button Color
