SUPPLEMENTARY OPERATING MANUAL
2
2
-
1
02-11-05
CDP-01
Figure Sheet 1-811-B
OVERVIEW OF FUNCTION
Operator Control Options
The CDP-01 signal amplifier can be operated by way of the CDP-01 control panel (internal
operation) or via the parallel port (external operation) with a remote control panel or
programmable logic controller.
The symbols below are used for the various operator control options in the following:
Internal
operation
External
operation
Special Features of External Control
When the operation modes are being controlled via
external control, the Automatic, Servo-Center, Manual keys
of the CDP-01 control panel are disabled.
If the cable to the parallel port ( -X7 ) of the CDP-01 is
disconnected, the last mode selected is retained until other
settings are made on the internal control panel.
