Fife CDP-01, Additional Instruction Manual

Page: 13 / 18

SUPPLEMENTARY OPERATING MANUAL 2
2 -
5
02-11-05
CDP-01
Figure Sheet 1-811-B
Explanation of the Sensor Modes
EDGE LEFT - Select this sensor mode while in Manual
mode for guiding to the Edge 2 output of the SE-34
sensor. The SE-34 sensor signal and the mandrel
position transducer signal are combined.
EDGE RIGHT- Select this sensor mode while in
Manual mode for guiding to the Edge 1 output of the
SE-34 sensor. The SE-34 sensor signal and the
mandrel position transducer signal are combined.
EDGE CENTER- Select this sensor mode while in
Manual mode for center guiding to both the Edge 1
and Edge 2 outputs of the SE-34 sensor. The SE-34
sensor signals and the mandrel position transducer
signal are combined.
SPECIAL- Select this sensor mode while in Manual
mode to view the Edge 2 output of the SE-34 sensor.
SPECIAL- Select this sensor mode while in Manual
mode to view or calibrate the output of the Mandrel
Position Transducer.
SPECIAL- Select this sensor mode while in Manual
mode to view the Edge 1 output of the SE-34 sensor.