Fieldmann FVC 3002 ED, User Manual

Page: 8 / 60

EN 8
FVC 3002 ED
What to do "When..."
7. WHAT TO DO "WHEN..."
When... Causes Repairs
The pump does not start
No power supply Check the power supply
The fl oat does not switch Move the fl oat to a higher position
Not fl owing
The suction sieve is clogged
Flush out the suction sieve with a current
of water
The pressure hose is bent Straighten the hose
The pump does not turn off The fl oat cannot fall lower
Place the pump correctly on the fl oor of
the tank
Insuffi cient fl ow
The suction sieve is clogged Clean the suction sieve
Lowered pump capacity due to dirty and
silted water Clean the pump and fl ush the hose with
clean water
The pump turns off after a short
time
The temperature fuse stops the pump due
to dirty water Disconnect the power plug. Clean the
pump and the pumping pit
The water is too hot. The temperature fuse
stops the pump Check that the maximum water
temperature of 35 °C is not exceeded
NOTE: Not covered by warranty:
Damage to the rotating mechanical gasket caused by running the pump empty, or by foreign objects in the
water
Blocking of the running wheel by foreign objects
Damage during transport
Damage caused by unprofessional alterations by persons