Fieldmann FDUK 70305 - 0, User Manual

Page: 14 / 24

EN 14
Hearing protection
FDUK 70305 - 0
A risk of injury exists in the case that instructions in this manual are not followed. The jigsaw complies with
valid technical regulations and norms.
When working with the jigsaw, the protective cover must always be pushed down.
Regularly check both screws on the clamp of the saw blade.
Do not use damaged or worn saw blades.
Regularly check the setting of the guide pulley.
Do not turn the saw on if the saw blade slid into the workpiece.
Never overload the saw so much that the engine ceases.
Never try to stop the movement of the saw blade, even when the engine is turned off.
The saw blade itself is removed very quickly. The blade’s teeth are very sharp.
Never aim the saw at another person.
Use protective gear against noise, dust and vibrations!!!
WARNING! Keep these safety instructions!!!
6. HEARING PROTECTION
WARNING! In case the sound pressure level exceeds the value of 90.2 dB(A), wear adequate hearing
protection to avoid damage to your hearing!
7. OPERATION
WARNING! Do not allow familiarity with products to make you careless. Remember that a careless fraction
of a second is suffi cient to infl ict serious injury.
WARNING! Always wear eye protection with side shields marked to comply with ANSI Z87.1. Failure to do
so could result in objects being thrown into your eyes resulting in possible serious injury.
WARNING! Do not use any attachments or accessories not recommended by the manufacturer of this
product. The use of attachments or accessories not recommended can result in serious personal injury.
WARNING! Never use abrasive cut-off wheels of any kind with this saw. Use of non wood cutting blades
can result in property damage or serious personal injury.
APPLICATIONS
You may use this product for the purposes listed below:
Cutting all types of wood products (lumber, plywood, paneling, composition board, and hard wood)
INSTALLING/REMOVING BATTERY PACK
See Figure 3, page 3.
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack snap in place and that battery pack is secured in the
product before beginning operation.
Depress the latches to remove the battery pack.
For complete charging instructions, see the operator’s manuals for your battery pack and charger.