EN
16
FDAK 70205-0
INFLATING WITH THE HIGH PRESSURE HOSE
See Figure 9.
The air chuck on the high pressure hose can be used without adaptors to infl ate tires or with any application that
has a valve stem that fi ts the air chuck opening.
NOTE:
When infl ating items of 10 PSI or less, infl ate in short bursts and check after each burst by feel or with
a calibrated measuring device to determine accurate pressure.
Press mode button to activate.
Set desired pressure.
Place air chuck on valve stem and lock in place.
Press the high pressure (II) switch to start infl ating.
When the desired pressure is reached, turn the switch off.
Remove the hose and store in hose wrap on the right side of the product.
Press and hold the mode button to deactivate the display.
NOTE:
Stand 10 feet away from item being infl ated.
INFLATING WITH THE HIGH PRESSURE AIR HOSE AND ACCESSORIES
See Figure 10–13.
The high pressure air hose can be used with the provided adaptors to infl ate a variety of items.
To install accessory: insert adaptor (or needle) into air chuck and push air chuck clamp down until it locks
into place. Infl ate to desired pressure.
Remove accessory by lifting air chuck clamp up and pulling the adaptor (or needle) from air chuck.
INFLATING MANUALLY FOR HIGH AND LOW PRESSURE APPLICATIONS
Connect either high or low pressure hose to item to be infl ated.
Depress power switch to proper switch (low or high pressure) until desired pressure is reached.
NOTE:
Stand 10 feet away from item being infl ated.
Turn off power switch.
ACCESSORIES
See Figures 11–13.
The supplied accessories perform a variety of functions. The tapered adaptor can be used on smaller pinch
valves to infl ate items like fl oats and children’s toys, which usually require the user to infl ate them by blowing air
into them. The sport ball needle can be used to infl ate any type of sports ball or any other item that requires an
infl ation sport ball needle.
NOTE:
When infl ating items of 10 PSI or less, infl ate in short bursts and check after each burst by feel or with
a calibrated measuring device to determine accurate pressure.
OPERATION
